Canon G10 review calls
Canon has detected a problem in some units of its compact more sophisticated, the PowerShot G10, so it has established a review procedure for free.
Apparently in some units, some photos may show a few lines in the image that are not corrected with the camera settings, so you must send a G10 for service for repair for free.
The affected cameras are those that your serial number has a 5 or 8 in the fourth digit and fewer than 4 in the fifth. If this is your case, visit the Canon Europa page enabled for this problem or call 901 900 012.
sorry looking for pictures with g10 found your page and request help me I have a camera and when I use the macro to not get photos very close focus it is the fault of the camera or I have to use tripod and the number of mine is 7021001545
And man is impossible to tell without seeing anything. Check the manual which is the minimum focusing distance and under what conditions, and if you get it just come by the SAT if damaged.
I have a G10, happy with it (except certain aspects that should be borne in mind that it is reflex) to the first issue, dust from entering the lens (I know that for a bad default setting). In Serfoto ask me about 400 Euros to remove the dust, I say that the entry of dust on the lens (we're talking about compact) is not covered under warranty.
Canonist lifetime and you go a few, I would buy the G11, but after this I'm afraid that Canon is over for me.
Regards
My G10 has also suffered from dust or fungi may have. I have it under warranty and the house is not in charge of the repair. I am in the process of negotiation. In any case I would have said 150 or 170 Euros, in no case 400. Is that with this price you almost buy a new
Regards
good morning
with my g10 macro close focus is not achieved I can do to correct the defect.
regards
Spread a little